Sabtu, 03 Desember 2011

PENINGKATAN UMUR RANTAI KENDARAAN RODA DUA DENGAN ALAT PENGENCANG RANTAI




Ir. Isman Harianda M.T.
Dosen Politeknik Negeri Medan
(Institut Sains dan Teknologi Nasional Jakarta,  ismanharianda@yahoo.com.)

ABSTRAK

Rantai rusak disebabkan keausan maupun pertambahan panjang sudah biasa terjadi, apalagi rantai tidak terawat umurnya semakin pendek.Kerusakan rantai dapat dicegah/diperlambat dengan merawatnya secara teratur, yaitu pemasangan yang benar dan melumasinya.Walaupun sudah dirawat, dipasang dan dilumasi dengan baik, rantai masih juga berumur pendek karena adanya celah (gap), celah dibuat karena pemasangan rantai tidak boleh terlalu kencang.Untuk menambah umur rantai  dibuatkan suatu alat yang dapat menambah umur rantai yaitu Alat Pengencang Rantai dimana Alat ini dapat mengatur kekencangan rantai.Alat ini akan diuji coba pada rantai dan ternyata dapat menambah umur, terbukti keausan rantai berkurang sebesar 0,03 % dan penurunan pertambahan panjang rantai menjadi 0,14 %, serta setelah dihitung secara statistik, uji beda Paired Sample T-Test , hasilnya cukup baik dan rantai dapat bertambah umurnya.Selain itu rantai akan diuji tarik untuk mengetahui kekuatannya dan rantai mempunyai kekuatan tarik sebesar 17000 N (± 1,7 Ton), kekuatan 17000 N cukup baik karena beban aktual yang terjadi pada umumnya di lapangan sebesar 203 kg (2030 N) atau ± 12 % dari kekuatan maksimum rantai.

Kata Kunci : Rantai, Umur, Alat Pengencang Rantai



Increasing Life-time Of Chain at Two Wheeled Vehicle
with Using Chain Tighter

ABSTRACT
The chain damage  due to wear and the length the increased very common, olso the chain is not maintained his lifetime are getting shorter. Chain damage can be prevented by regularly maintained, which is the correct installation and lubrication.Although it has been maintained, installed and well lubricated, the chain is still short-lifetime because of the gap. Gap created due to the installation of the chain should not be too tight, To increase the life of the chain is been created a tool that can increase the life of the chain,  which is Chain Tighter where this tool can adjust the chain tension.This  Chain Tighter will be tested on a chain and it can add life, proved wear chain was reduced by 0.03%, and decreased the length of the chain to 0.14%, and after the calculated statistically, test Paired Sample T-Test, the results are quite good and the chain can have long-life.Besides the chain will be tested tensile strength and the chain has a tensile strength of 17,000 N (± 1.7 Ton), 17 000 N force is quite good because the actual load that occurs in general in the field of 203 kg (2030 N) or ± 12% of maximum strength chain.

Keywords:Chains, Life-time, ChainTighter.

Senin, 28 November 2011

Energy

Energy

From Wikipedia, the free encyclopedia

Lightning is the electric breakdown of air by strong electric fields, which produce a force on charges. When these charges move through a distance, a flow of energy occurs. The electric potential energy in the atmosphere then is transformed into thermal energy, light, and sound, which are other forms of energy.
In physics, energy (Ancient Greek: ἐνέργεια energeia "activity, operation"[1]) is an indirectly observed quantity. It is often understood as the ability a physical system has to do work on other physical systems.[2][3] Since work is defined as a force acting through a distance (a length of space), energy is always equivalent to the ability to exert pulls or pushes against the basic forces of nature, along a path of a certain length.
The total energy contained in an object is identified with its mass, and energy (like mass), cannot be created or destroyed. When matter (ordinary material particles) is changed into energy (such as energy of motion, or into radiation), the mass of the system does not change through the transformation process. However, there may be mechanistic limits as to how much of the matter in an object may be changed into other types of energy and thus into work, on other systems. Energy, like mass, is a scalar physical quantity. In the International System of Units (SI), energy is measured in joules, but in many fields other units, such as kilowatt-hours and kilocalories, are customary. All of these units translate to units of work, which is always defined in terms of forces and the distances that the forces act through.
A system can transfer energy to another system by simply transferring matter to it (since matter is equivalent to energy, in accordance with its mass). However, when energy is transferred by means other than matter-transfer, the transfer produces changes in the second system, as a result of work done on it. This work manifests itself as the effect of force(s) applied through distances within the target system. For example, a system can emit energy to another by transferring (radiating) electromagnetic energy, but this creates forces upon the particles that absorb the radiation. Similarly, a system may transfer energy to another by physically impacting it, but in that case the energy of motion in an object, called kinetic energy, results in forces acting over distances (new energy) to appear in another object that is struck. Transfer of thermal energy by heat occurs by both of these mechanisms: heat can be transferred by electromagnetic radiation, or by physical contact in which direct particle-particle impacts transfer kinetic energy.
Energy may be stored in systems without being present as matter, or as kinetic or electromagnetic energy. Stored energy is created whenever a particle has been moved through a field it interacts with (requiring a force to do so), but the energy to accomplish this is stored as a new position of the particles in the field—a configuration that must be "held" or fixed by a different type of force (otherwise, the new configuration would resolve itself by the field pushing or pulling the particle back toward its previous position). This type of energy "stored" by force-fields and particles that have been forced into a new physical configuration in the field by doing work on them by another system, is referred to as potential energy. A simple example of potential energy is the work needed to lift an object in a gravity field, up to a support. Each of the basic forces of nature is associated with a different type of potential energy, and all types of potential energy (like all other types of energy) appears as system mass, whenever present. For example, a compressed spring will be slightly more massive than before it was compressed. Likewise, whenever energy is transferred between systems by any mechanism, an associated mass is transferred with it.
Any form of energy may be transformed into another form. For example, all types of potential energy are converted into kinetic energy when the objects are given freedom to move to different position (as for example, when an object falls off a support). When energy is in a form other than thermal energy, it may be transformed with good or even perfect efficiency, to any other type of energy, including electricity or production of new particles of matter. With thermal energy, however, there are often limits to the efficiency of the conversion to other forms of energy, as described by the second law of thermodynamics.
In all such energy transformation processes, the total energy remains the same, and a transfer of energy from one system to another, results in a loss to compensate for any gain. This principle, the conservation of energy, was first postulated in the early 19th century, and applies to any isolated system. According to Noether's theorem, the conservation of energy is a consequence of the fact that the laws of physics do not change over time.[4]
Although the total energy of a system does not change with time, its value may depend on the frame of reference. For example, a seated passenger in a moving airplane has zero kinetic energy relative to the airplane, but non-zero kinetic energy (and higher total energy) relative to the Earth.